Water jacket motors

Power outputs5,5 - 13kW
Frames132 - 160
Efficiency classesIE3, where applicable
SectorsFood / Industrial / Plastic and Rubber / Steel Industry
Most common applicationsMachine tools / Handling and Lifting Systems

These motors best fit in:
- environments with a high percentage of airborne material
(steelworks, paper mills, rubber or plastic plants, etc.).
The operation of this type of motors is not affected by possible deposits of material on the motor itself, as cooling is guaranteed by a water circulation system.
- limited installation spaces
The effectiveness of the cooling system and the absence of external ventilation allow very compact products with a power output higher than traditional solutions.
- silent environments
The noise levels achieved by these motors are considerably lower than those of traditional motors of similar power. 
- High ambient temperatures
The water-cooled solution is the most suitable in installations where ambient temperature is too high to allow external ventilation.

5BW Motor Series
StandardsIEC EN 60034 / IEC EN 60072
Polarity / SpeedSingle / Typically 1000 - 1200 - 1500 - 1800rpm
Cooling methodIC71W
IP Index of ProtectionIP55
Insulaton ClassF
Temperature rise ClassB
Cuscinetti2RS C3 high performance
Power supplyMain / Frequency converter
Cooling waterFresh water
Ambient temperature0°C / +40°C
Material of the caseWelded steel with internal anti-rust treatment
Shaft extensionD-End
Shape of the shaft extensionCylindric, with key
Material of the shaftSteel C40
Vibration gradeA
MountingsWith feet and/or flange / horizontal and vertical
Special solutions

Insulation class H
Stator windings with enhanced insulation system for inverter
Special voltage and/or frequency
Double impregnation
Encapsulation of the windings

Bi-metal protection
PTC Thermistors
PT100 Thermo-resistances
PT1000 Thermo-resistances
Anticondensation heaters

Arrangment for vibration detector

Painting and solutions for extreme environment
Special painting colour (std RAL5010)
Special painting process for agressive environment
Drainage hole
Solutions for high temperatures ( up to +120°C)
IP56, IP65, IP66 protection degrees

Sealed bearings
Roller bearings
Hybrid bearings
Bearings for high temperatures
Re-greasing systems
D-End fixed bearing
Rotating labyrinth
Viton ring
Silicon ring

Albero e ventola
Special shaft extension and/or spacial flange
Second shaft extension
Vibration grade B (with half or full key)

Terminal box
Special cableglands
Special terminal box

Download PDF sheet

Industria Scientifica Generale Elettromeccanica Vicenza (I.S.G.E.V.) S.p.A.
Reg. Cap. € 520.000 fully paid up
REA 87642/VI
Reg. Imp. Vicenza n. 3803
No VAT: 00170430243

Web Agency Verona - Colombo 3000 srl