Motors for rail
| Power outputs | 0,12 - 75kW |
| Voltages | Up to 690V |
| Frames | 63 - 280 |
| Efficiency classes | IE2 - IE3, where applicable |
| Sectors | Rail |
| Most common applications | Fans / Pumps / Auxiliary systems |
These motors are the result of careful researches, examining the most extreme operating conditions and producing a specific range of electric motors with high quality standards, to meet the strict requirements of the railway sector.
The series name identifies the combination of materials of the main mechanical components of the engine (case and endshields):
| Series name | 1B | 2B | 3B | 4B | 5B |
| D-End Endshield | Aluminum | Cast-Iron | Aluminum | Cast-Iron | |
| Case | Aluminum | Cast-Iron | |||
| N-End Endshield | Aluminum | Cast-Iron | |||
| Standard configuration | Special configuration | |
|---|---|---|
| Standards | Applicable IEC EN 60034 IEC EN 60349/2 | Specification on request |
| Polarity / Speed | Single | Double / Triple |
| Cooling method | IC 411 | IC 410 / IC 416 / IC 418 |
| IP Index of Protection | IP55 | IP56 / IP65 / IP66 |
| Insulaton Class | F | H |
| Temperature rise Class | B | F / H |
| Altitude | <1000m a.s.l. | up to 4000m a.s.l. |
| Power supply | Main | Frequency converter |
| Rotor | Squirrel cage | - |
| Material of the rotor windings | Aluminum | - |
| Duty | S1 | S2 … S9 |
| Ambient temperature | -20°C / +40°C | -20°C(*) / +100°C |
| Shaft extension | D-End | D-End + N-End |
| Shape of the shaft extension | Cylindric, with key | Conical / special |
| Material of the shaft | 39NiCrMo3 | Stainless steel / C40 |
| Bearings | Ball | Roller / Angular |
| Seal ring | Labyrinth | MIM / V-Ring |
| Material of the screws | Stainless steel | - |
| Vibration grade | B (with half key) | B (with full key) |
| Material of the fan | Aluminum | - |
| Material of the fan cover | Steel | - |
| Lifting eyebolt | From 100 frame and above | On request |
| Feet | Fixed (Cast-iron) / Removable (Aluminum) | - |
| Terminal box - position | On the right side, when seen from D-End (Cast-iron) On top ( Aluminum) | On top(§) / On the left(§) / Flying leads |
| Terminal box - material | Aluminum (cast-iron for 200 and 225) | - |
| Cable entry | On the right side | Rotatable in step of 90° |
| Q.ty of terminals (single polarity) | 6 | - |
| Q.ty of terminals (double polarity) | 6 | 12 |
| Q.ty of terminals (triple polarity) | 12 | - |
(*): -50°C with 5B series only
(§): Available only on 5B Motor series
Windings
Insulation class H
Tropicalisation
Stator windings with enhanced insulation system for inverter
Special voltage and/or frequency
Double impregnation
Encapsulation of the windings
Protections
Bi-metal protection
PTC Thermistors
PT100 Thermo-resistances
PT1000 Thermo-resistances
Anticondensation heaters
Transducers
Arrangment for vibration detector
Arrangment for speed detector (toothed wheel)
Tachometer
Encoder
Painting and solutions for extreme environment
Special painting colour (std RAL5010)
Special painting process for agressive environment
Solutions for low temperatures (down to -50°C)
Solutions for high temperatures ( up to +120°C)
Anti-rain canopie
Anti-sun canopie
IP56, IP65, IP66 protection degrees
Open drainage hole
Bearings
Sealed bearings
Roller bearings
Insulated bearings
Hybrid bearings
Angular bearings
Re-greasing systems
D-End fixed bearing (only with Cast-iron endshield)
Silicon ring
V-Ring
Shaft and Fan
Special shaft extension
Second shaft extension
Non-ventilated motor (IC410)
Forced ventilation (IC416)
Non-ventilated motor, externally cooled (IC418)
Vibration grade B (with half or full key)
Terminal box
12 terminals
Special cableglands
Position of terminal box
Direction of cable entry
Flying leads
Auxiliary terminal box
Special cable entry
Sealing of cable passage hole case-terminal box